This item cannot be canceled or returned.The Williams Sound IR T2 is a two-channel, SoundPlus Series infrared transmitter designed to deliver a coverage area of up to 18,000 square feet for assistive listening and language interpretation in commercial spaces. It supports 2.3, 2.8, 3.3, and 3.8 MHz transmission frequencies with WIR RX22-4, WIR RX18, or IR R1 receivers.





Line inputs are accessible via two Euroblock connectors while a 3.5mm mini jack allows the connection of a microphone, which can be optimized using the dedicated mic gain knob and microphone channel selection switch. Additionally, a control system may be integrated via a separate Euroblock port.





LEDs are provided for indication of power status and signal presence. The power-saving mode automatically shuts off the carrier after 12 minutes without audio. The included wall/ceiling mount and international power supply enable flexible installation.The Williams Sound WIR RX22-4N Bodypack is an infrared bodypack listening receiver for use with compatible Williams Sound transmitters. The bodypack features 4-channels and operates on the 2.3, 2.8, 3.3, 3.8 MHz bandwidth. The WIR RX22-4 can be used with mono or stereo headphones and earphones, or a neck-loop. Dual infrared detectors provide maximum sensitivity and operating range.Turn up the volume with the adult-sized HED 027 Heavy-Duty Folding Mono Headphones from Williams Sound. These headphones are designed to offer crisp sound in a lightweight and comfortable design. Foam earpads keep you listening in comfort for hours. The single-sided cord helps to minimize snags and tangles, and the standard 3.5mm mono plug is compatible with Williams Sound receivers and Pocketalkers.The Williams Sound NKL 001 is an induction neckloop designed to magnetically couple an audio signal to a telephone coil-equipped (T-Switch) hearing aid. The neckloop has a standard 1/8" mini plug that can be connected to any audio device that has an 8-16 Ohm 1/8" output, such as a beltpack receiver, TV, tape player, etc. The neckloop has a slider so you can adjust the tension, and the 18" cord provides a good amount of slack for use with body-worn devices.The black CHG 3502 Dual-Bay Bodypack Battery Charger from Williams Sound is used for charging select Williams Sound T36, T46, R37 and Motiva bodypack transmitters and receivers. The two-bay charger allows you to simply dock the components and recharge the NiMH batteries inside without removing them.





The charger's plastic chassis features a red LED for each bay that indicates the battery is being charged. Note that you must have NiMH batteries installed and the components must be set to the NiMH setting.?It takes 16 hours to fully recharge the batteries, and it's safe to leave the units in the charger even after the batteries have fully charged.?The POE KT1 IR T2 Infrared Transmitter POE Wiring Kit from Williams Sound allows an installer of an IR T2 transmitter (sold separately) to provide POE power and one of the following three options: 1 channel of balanced line level audio, 1 or 2 channels of unbalanced line level audio, or RS-232 control and monitoring signal. The kit should be used for applications using the power supply included with the IR T2 transmitter. It includes the WCA 131 and the WCA 133 connectors.The BKT024 from Williams Sound is a wall/ceiling omnidirectional mount designed to support the WIRTX9 infrared emitter.The IDP008 from Williams Sound is a self-adhesive wall plaque that alerts your patrons to the fact that your establishment has a hearing assistance system. Perfect for theaters, auditoriums, and more, the plaque is large and easy-to-see.